Back to blogs

    Tender rejections are a price quote you already received

    By TransportOne Editorial Team•November 21, 2026•7 min read
    A line of semi trucks with dry van trailers queued on pavement waiting to load.

    Your Memphis to Dallas primary took 93 percent of your tenders in the spring. Last month it took 58 percent, and the loads that fell through the guide cleared at an average of $410 over the contract linehaul. Somebody on the weekly call gets assigned to ring the account manager.

    That call almost never moves the number. A tender rejection rate is the share of loads you offered a carrier that the carrier declined, and dispatch declines when the truck can earn more somewhere else that day. Every rejection is a price quote, delivered one load at a time, in a format procurement doesn't read.

    The carrier already answered the question you were going to ask

    Ask a carrier at the QBR whether your rate is still fair and you get a conversation about driver pay and insurance renewals. Watch what their dispatch does with a Thursday 4pm tender for a Friday 6am pickup and you get a number instead.

    The asymmetry is written into the contract. A contracted rate is an option you hold and the carrier wrote. Declining costs them a slightly worse position in a bid months away that you both expect to price higher than this one. While spot is climbing, that's a cheap option to walk away from.

    So we'd put less weight on rejection penalties than most shippers do. A clause that docks a carrier for falling under 95 percent acceptance is only worth invoking in a tight market, and a tight market is the week you most need that carrier to take the load. Trade the clause for a shorter repricing window and you get something you'll actually use.

    Contract and spot are 23 cents apart

    DAT's dry van report of 9 November 2026 puts October contract linehaul at $2.45 a mile against spot at $2.22, a spread of 23 cents. In October 2025 that spread was 34 cents. The cushion that made your load the better choice has lost a third of its width in a year.

    Direction matters more than level here. Uber Freight's monthly executive freight update of 11 November 2026 has dry van spot up 2.8 percent month over month while contract rates rose 1.5 to 1.7 percent. DAT's 16 November report puts spot linehaul at $2.27, up 35.8 percent year over year and 24.6 percent above the nine-year seasonal average of $1.82. Capacity points the same way: dry van load-to-truck was 10.90 in the 9 November report, against 5.70 a year earlier.

    Acceptance has followed. First tender acceptance across Uber Freight's network was 79 percent in October, up from 78 in September, with routing guide compliance at 86 percent. The compliance figure is the one worth sitting with: roughly one load in seven left the guide altogether and got bought somewhere else.

    The national figure won't tell you which lane

    Seventy-nine percent is an average over every lane, shipper and award in a large network. Your Chicago to Atlanta primary may be running at 96 while a Laredo backhaul sits at 40, and the two problems have nothing to do with each other. An index tells you which way to lean in a negotiation. The lane is the only unit you can reprice.

    A rising tender rejection rate means five different things

    Before anyone opens the rate file, separate the causes. On a dashboard they look identical.

    What the pattern looks likeWhat it usually isWhat to change
    Rejections show up across every carrier on the lane inside the same two or three weeksThe market repriced past your contractThe rate
    Rejections cluster at one origin whatever the destinationDwell at that facilityThe appointment, or what you pay for the time you take
    Rejections concentrate on tenders sent inside 24 hours, or after 4pm on a FridayLead timeWhen the tender fires
    One carrier declines nearly everything while the others on the lane holdThat carrier moved the equipment to another customerThe award, not the rate
    Rejections rise on one direction of a round trip onlyHeadhaul and backhaul priced as a single lanePrice the legs separately

    The facility row is the one teams skip, and the evidence for it is already in the dwell data. Say your contract pays detention after two free hours and the average time between gate-in and gate-out at that door is three and a half. The carrier bills ninety minutes, eats the two free hours, and passes on the four o'clock reload it had lined up. No detention rate covers a missed reload. The carrier stops answering your tenders and never raises it at the QBR.

    Settling that argument takes gate events per stop, and most teams keep them nowhere near the tender log. Shipment exception tracking is what closes the gap: arrival and departure captured per stop and per facility, so the dwell number on the table is yours rather than the carrier's.

    Your routing guide report answers the wrong question

    Most TMS guide reports answer whether the load got covered. A load tendered to the primary, declined, tendered to the first backup, declined, then accepted by the second backup comes back as covered, in-guide and on time. That row shows three green cells and a load you paid position three for.

    Count it the other way, by lane and by week: tenders offered to the primary, tenders the primary accepted, the average guide position where coverage landed, and the dollar gap between the awarded primary rate and what you actually paid. The fourth column is the rejection bill. Almost nobody produces it, because the award lives in a procurement spreadsheet and the paid amount lives in the invoice.

    Both numbers already exist. An automated freight invoice audit reconciles each invoice against the contracted rate for that lane at the moment of payment. Penny computes the variance to decide whether the charge is payable. Sending that same variance back to procurement, tagged with the lane and the guide position that produced it, turns an audit artifact into the input for the next bid.

    Moves worth making before the bid opens

    Rank lanes by what the rejections cost you. The rejection rate on its own will send you to the wrong lanes: a lane that runs four loads a month and declines half of them is noise. A lane that runs forty, declines twelve, and pays $400 over on each fall-through is bleeding $4,800 a month, and that gap gets set at tender time, which is why a routing guide fails weeks before AP sees the number.

    Then do the arithmetic nobody does. Raising the contract rate $100 a load across all forty costs $4,000 a month and buys back the twelve loads you were covering at spot. On that lane the reprice pays for itself before you count coordinator hours. Run the same numbers on a lane with three fall-throughs a month and it won't, so leave that one until the bid.

    When the diagnosis is the dock, a higher rate buys a quiet quarter and then the rejections come back, because the dwell didn't change. Widen the appointment window, move the slot, or put a standing facility premium on that lane and stop calling it a linehaul problem. When one carrier has clearly reallocated its equipment and the rest of the guide is still accepting, re-award to the backup at the backup's rate. That's an edit to the guide and it doesn't need a negotiation.

    A mini-bid on the eight or ten lanes that fail this test beats waiting for the annual event. Working a dozen carriers at once is the coordinator cost that used to make a mid-year reprice unaffordable, and that is the part freight rate negotiation takes over. In tight-window networks the case is sharper: in freight management for food and beverage shippers, a declined tender becomes a missed delivery window the same afternoon.

    Pull ninety days of tender history for your top twenty lanes this week. For each one write down the primary's acceptance rate, the average guide position at coverage, and the paid-versus-awarded gap. Then name which row of that table it is. Most teams find two or three lanes they've been funding quietly since the last bid. If you'd rather see the rejection bill computed off your own invoices than assembled by hand, book a walkthrough and bring one lane's history with you.

    Frequently asked questions

    What counts as a good tender acceptance rate?
    Judge it against your own lane history before any benchmark. For context, Uber Freight's monthly executive freight update of 11 November 2026 put first tender acceptance across its network at 79 percent in October, with routing guide compliance at 86 percent. A primary that accepted in the mid-nineties last year and sits in the fifties now has told you something specific about that lane, whatever the network average is doing.
    Does a rising tender rejection rate always mean the rate is too low?
    No. Rejections spread evenly across every carrier on a lane over the same few weeks point at price. Rejections that cluster at one origin point at dwell, and rejections that cluster on short-notice tenders point at lead time. If one carrier declines nearly everything while the rest of the guide keeps accepting, that carrier has moved its equipment and the fix is a re-award rather than a higher rate.
    How do you calculate what a rejected tender costs?
    Take what you actually paid to cover the load and subtract the awarded primary rate for that lane, then total it by lane and by week. The paid figure sits in the invoice and the awarded figure sits in the bid file, so the join is usually the hard part. Add the coordinator time spent re-sourcing if you want the full number, but the rate gap alone is enough to rank lanes.
    Is it worth repricing a lane mid-contract instead of waiting for the annual bid?
    It is when the monthly rejection bill on that lane is larger than the cost of the increase across every load on it. A lane running forty loads a month with twelve fall-throughs at $400 over costs you $4,800, so a $100 per load increase across all forty is cheaper and brings the service back. On a lane with three fall-throughs a month the math goes the other way and the annual bid is soon enough.

    See it on your freight

    Stop Overpaying On Freight Invoices

    Penny checks every invoice against your contracts and what the shipment actually did, then disputes what doesn’t hold up. You pay 30% of what she saves you, and nothing if she saves nothing.

    See how Penny works

    Found this useful? Share it with your team.

    Share on LinkedIn